6 Inch Submersible Motor

• Model NO.: 6SD Series Submersible Motor

Product Description

Features & benefits
1. Meet the requirements of Standard IEC34-1 with fully sealed shaft 6 inches NEMA standard flange connector Angular contact bearing installed on the bottom side of motor standing for even more axial loadWith stainless steel shaft,
2. Credible mechanical sealsAxial load: 15, 500NWith throw sand bush, reinforced butyl rubber house for press balance device
Specification:
Power: Three phase, 4kw~18.5kw
Power supply: Three phase, 400V± 10%, 50HZ, direct start
Protection class: IP58
Insulation class: F
Water temperature: Up to 35º C
PH: 6.5-8.0
Minimum water flux through motor: 16cm3/s
Maximum numbers of start: 20/h
Vertical or horizontal installation
Anti water connect cable: 3x4.0mm2 or 3x6.0mm²

Model		Motor  Power		Voltage	Rated  Current		Cosφ	Speed	L	G. W
		Kw	Hp	V	A			r. p. m	mm	kg
6SD-4		4	5.5	400	10.3		0.82	2835	655	31.2
6SD-5.5		5.5	7.5	400	12.3		0.83	2835	685	34
6SD-7.5		7.5	10	400	16.5		0.85	2835	720	37.3
6SD-9.2		9.2	12.5	400	20.2		0.86	2835	765	41.6
6SD-11		11	15	400	23.6		0.86	2835	795	44.2
6SD-13		13	17.5	400	27.6		0.86	2850	825	47.2
6SD-15		15	20	400	31.8		0.86	2850	870	51.5
6SD-18.5		18.5	25	400	38.2		0.86	2850	920	55.5